Wetherby BF Scrim Adhesive

£9.25 Ex VAT

  • Water resistant
  • Excellent adhesion
  • Good flexural strength
  • Good impact resistance
  • Easy to use

BF scrim adhesive is an embedding mortar applied for use over your insulation boards which is encased with our alkali resistant scrim cloth. A top coat can then be applied with any “BF” aggregate dry dash decorative finish.

Sold in 25kg bags covering approximately 3m2 per bag


BF Scrim Adhesive is a basecoat for our “BF”  Exterior Dry Dash insulating finishing system. It is easy to use by just adding water, improving on site quality control. It shows excellent adhesion onto all our insulation boards. It ‘s main purpose is providing an excellent basecoat for embedding Alkali Resistant fibre mesh prior to the decorative top coat application.

BF Adhesive should be mixed on site with water in the ratio of approximately 4 parts powder to 1 part water by weight, mixing with a high speed paddle mixer for 3 – 5 minutes.  Allow the material to stand for 10 minutes, remix again activating the cellulose within the polymers and use. Mix only enough material for immediate use.

Used Under

  • BF Dash Receiver